JTAG Debugger for ARM Cortex M3
![](https://www.edutechlearning.com/xadmin/myaccount/upload/media/arm-jtag-m3201710021428389533380.jpg)
Description
The JTAG Debugger for ARM Cortex M3 is ARM USB JTAG supported by OpenOCD open source ARM debugger. It can be used for flashing and debugging the program.
Features
- High speed USB 2.0 with lower latency time, RTCK adaptive JTAG clock up to 30Mhz
- Can be used with all ARM devices for programming and debugging
- Uses ARM's standard 2x10pin JTAG connector
- Supports ARM targets working in voltage range 2V to 5V DC
- Software supported by OpenOCD (open source) debugger
- Study of RTOS working is made easy using this debugger tool
- Dimensions 50mm x 40mm (2x1.6inches) plus 20cm (8inches) JTAG cable
- Debug all ARM microcontrollers supported by OpenOCD